360° Bicycle Phone Holder

40 reviews for 360° Bicycle Phone Holder

1. H***e

   Rated 5 out of 5

   November 20, 2024

   I specifically bought this for my iPhone 7 Plus that I have in a fairly slim case and with a Popsocket on the back. I was happy to see that it does in fact fit my phone and holds it securely. This is so easy to install on a bike and then be able to move it to another if you so choose. Initially, putting my phone in the holder was tough. It does fit tightly. After putting it in and removing a couple of times, it seemed easier but without losing grip. The case seems like it will hold up and doesn't look like it's overstretched. Overall, I'm really pleased with this product.
   

   

   

   +1

   M***a

   Rated 5 out of 5

   November 20, 2024

   I shopped around before choosing this cell phone holder. I bike on dirt roads quite a bit, and I wanted to be sure that I purchased a product that would be sturdy enough to handle frequent bumps.
   
   This product was it! It was easy to attach to my handlebar, and easy to place my phone, complete with OtterBox case, in the rubber guards. Both case and phone have remained stable for 2 weeks of pretty challenging tests. There is no movement of either, and I am never worried about the phone falling. I highly recommend this product.
   

   

   

   +1

   P***v

   Rated 5 out of 5

   November 19, 2024

   Having gone through several other bike mounts that broke in less than a year, I decided to try this one because of the good reviews. So far, I am impressed with it so far after a few rides. The mount is super easy to install on any handlebar and has a great grip that doesn't slip. The actual phone holder is a nice silicon web that fits almost any phone. This model does not have the plastic side bars to hold the phone, which actually is good as they have been the source of other bike mount failures I've experienced. I should say that while the mount will accommodate a phone with a case, it can be a bit tight depending on the thickness of your case. So you may want to take your phone out of the case before placing into the mount. T
   U***s

   Rated 5 out of 5

   November 19, 2024

   Really love the simplicity of the installation. You just hand turn the knob to tighten the mount on the handle and you're done (plus it makes removal just as easy). My previous mount had rubber pieces you needed to stick in to fit different sized handles plus you needed a screwdriver to tighten it in. There is an additional rotating knob on the back of the actual phone mount which secures the phone into any position. You are trading some ease of movement (since you need to loosen/tighten each time you want to rotate your phone) for stability as it does seem to lock it into place well and you can still set the phone in any position horizontal, vertical, or other. Overall seems very well made and thought out.
   J***n

   Rated 5 out of 5

   November 19, 2024

   Ordered this mount to help me while I'm out cycling with my son. Came fast, installed in seconds and holds my Google Pixel 2XL perfectly!!
   

   

   

   

   +2

   O***a

   Rated 5 out of 5

   November 19, 2024

   Just received this mount today and installed in less than 15 seconds on my handlebar.
   Luv the way it Clamps onto the handlebar with a few quick turns.
   My iPhone 8 Plus fit pretty securely although it seems that you have to stretch the rubber a bit too far and
   I worry about it snapping, but didn't happen.
   Road about 10 miles with it and it felt pretty sturdy.
   Just make sure the adjustment is tight on the ball mount for the bracket to keep the phone from slowly tilting down when riding over bumpy areas and not sure if this may be a problem as I'm still testing it for the second ride.
   K***y

   Rated 5 out of 5

   November 18, 2024

   I put it on my suzuki maruader 800. Is really great at speeds under 50. However going 50 and above there was tons of vibrations in the rubber mount. So good for around town.
   W***e

   Rated 4 out of 5

   November 18, 2024

   Well so far so good. Just a few issues.
   
   Pros:
   1) It fits large phones with otterbox cases - even though it seems too small.
   2) It fits handlebars
   3) It seems to stay put even over bumps for the most part
   
   Cons:
   1) It seems floppy and loose (but it somehow stays put just fine). I am concerned this will get worse. It really needs some rigidity.
   2) It does not fit larger posts (it says it does but it wont wrap around the frame)
   3) I am worried the straps that hold the phone will break eventually, they are very thin.
   4) The handlebar strap is not 100% solid. It still rotates around the handlebar even when strapped down to the max.
   
   Its OK for the price, but if you want something rigid and solid keep looking. This mount has zero rigidity, its basically 100% silicone except for the rotating mechanism.
   

   

   

   +1

   R***p

   Rated 5 out of 5

   November 18, 2024

   What I love about this mount the most is that it is very configurable. It can be mounted in many locations, including my treadmill) and I can adjust the position of the phone screen to fit my preference. Also, it has a serious grip. If you properly tighten this thing it will not come off.
   

   I***v

   Rated 5 out of 5

   November 18, 2024

   There are certain things where the risk of loss requires a hard look at how to prevent it from happening. The thought of losing my phone at 50 mph made me uneasy. The Crab Grab is a great solution for anyone looking for an easy to use holder that keeps your phone in the perfect position. Installation and adjustment could not be easier, it took less than a minute for the whole operation. Every situation is unique, my handlebars are close to the gas tank, so I needed to move the unit further up. It has the flexibility to deal with almost any mount.
   А***n

   Rated 4 out of 5

   November 16, 2024

   Lightweight and easy to put on and takeoff. I live in an urban environment and have had screw on phone holders stolen so this helps prevent theft by taking it off easily. Not quite as sturdy as I was hoping for so the holder moves around a little when riding vs. others that I’ve had where the phone stays more fixed and sturdy.
   

   

   

   +1

   A***a

   Rated 5 out of 5

   November 15, 2024

   The clamp is narrow enough to fit in among things like a front reflector, etc. The clamp is VERY sturdy, well built, and holds tightly. The design to hold down the phone is great. I have an OLDER holder on my bike, the kind that clamps the phone from the sides along with rubber holding straps for the corners, and it constantly turns down the volume as the phone edges down (because of how I have to mount it high up in the cradle to try and avoid that in the first place, the rubber pulls it down back to a 'middle position'), or activates the phone assistant by squeezing the sides too hard when I DO mount it high in the cradle in the first place. THIS holder does NOT use side clamps. It only uses the corner rubber holder that stretches out and hooks the corners of the phone. We ride on VERY bumpy roads, hitting max speeds of 35.6 mph on big downhills, and so far we have had no issues with how securely it holds the phone. This is a great holder.
   
   Е***n

   Rated 3 out of 5

   November 14, 2024

   The good parts:
   - it's cheap
   - it does the job
   
   The bad parts:
   - it doesn't do a great job. The phone is wobbly and it's shaking too much on a bumpy road. I think this is due to the rubber design. In order to be better at this it needs to be more firmly fixed and made of only solid parts, no rubber.
   А***n

   Rated 4 out of 5

   November 14, 2024

   I bought one for me and one for my boyfriend. We have different phones and this fits both types. Mine tilts a little while I'm riding, but other than that, it's awesome.
   

   

   

   +1

   D***o

   Rated 5 out of 5

   November 14, 2024

   I haven't had this clamp very long, but I can alredy tell you that it is simple to use and effective: twist the wingnut to open or close. Not a lot of pressure is needed to keep it in place. For me, the only thing that will take some getting used to is inserting the phone in the cradle, since it requires that the bands be stretched completely around each corner....it almost feels like they're going to break - but they don't. For receiving or making calls on the go, it's probably best to leave the phone in the cradle and either use speakerphone or remove the entire unit by loosening the wingnut. I'm happy so far. I'll update if I encounter any issues.